Formation

Dans cette formation, vous apprendrez comment installer PitStop Pro et comment activer une version d'évaluation gratuite.

Durée : 5 minutes

Ce module de formation en ligne comprend quatre parties :

• Partie 1 - Activation de PitStop Pro
  
• Partie 2 - Découverte de l’interface utilisateur de PitStop Pro
  
• Partie 3 - Définition des préférences dans PitStop Pro
  
• Partie 4 - À vous de jouer
  

Durée : 20 minutes

Dans cette formation, vous allez découvrir les présélections qui existent dans PitStop Pro. Ce module comprend cinq parties :

• Partie 1 - Introduction
• Partie 2 - Changements globaux
• Partie 3 - Utilisation d’un Script d’Actions
• Partie 4 - Création d’un Script d’Actions
• Partie 5 - QuickRuns
  

Durée : 20 minutes

Ce module de formation en ligne comprend cinq parties :

• Partie 1 -  À propos des contrôles en amont
  
• Partie 2 - Profils de contrôle en amont
  
• Partie 3 - Exécution d’un contrôle en amont
  
• Partie 4 - Rapports de contrôle en amont
  
• Partie 5 - Contrôles en amont automatiques
  

Durée : 20 minutes

Dans cette formation, vous allez apprendre comment activer und licence d'abonnement PitStop Pro.

Duration: 1 minute

Dans cette formation, vous allez apprendre comment activer und licence d'abonnement PitStop Server.

Duration: 1 minute

Dans cette formation, vous allez apprendre les bases de PitStop Server. Ce module comprend sept parties :

• Partie 1 - Introduction
  
• Partie 2 - Installation et activation de PitStop Server
• Partie 3 - Interface utilisateur de PitStop Server
• Partie 4 - Configuration des dossiers actifs
• Partie 5 - Vérification des fichiers traités
• Partie 6 - Préférences de PitStop Server
• Partie 7 - Questionnaire

Durée : 30 minutes

Ce module de formation en ligne comprend quatre parties :

• Partie 1 - Introduction
  
• Partie 2  - Configuration de Workgroup Manager
  
• Partie 3  - Configuration de PitStop Pro pour le fonctionnement avec Workgroup Manager
  
• Partie 4  - Questionnaire
  

Durée : 15 minutes

Dans ce cours, vous allez apprendre comment ajouter un fond perdu avec PitStop Pro.

Durée: 5 minutes

Ce module de formation en ligne comprend deux parties :

• Partie 1 - Le jeu d’outils Modification PitStop
• Partie 2 - Exercice interactif

Durée: 15 minutes

Dans cette formation, vous apprendrez tout sur le Certified PDF.

Ce module de formation en ligne comprend 4 parties :

• Partie 1 – Introduction
• Partie 2 – Lancement d'un flux de travail Certified PDF
• Partie 3 – Vérification des fichiers Certified PDF
• Partie 4 – Questionnaire

Durée: 10 minutes

Ce cours sur l'utilisation des zones de page comprend cinq parties:

• Introduction
• Visualisation des propriétés des zones de page
• Modifications à l'aide du panneau Zone de page PitStop
• Application d'une disposition de conception à la creation des zones de page
• Exercice

Durée: 20 minutes

Dans cette formation, vous apprendrez comment créer vos propres raccourcis dans PitStop Pro.

Durée: 1 minute

Dans cette formation, vous apprendrez comment personnaliser des rapports de contrôle en amont.

Ce module de formation en ligne comprend trois parties :

• Partie 1  À propos des rapports de contrôle en amont

• Partie 2  Modèles de rapport

• Partie 3  Comment créer votre propre modèle de rapport

Durée: 15 minutes

Voici une brève introduction à la fonctionnalité Espaces de travail dans Pitstop Pro.

Durée: 5 minutes

• Problèmes de surimpression
• Comment cela fonctionne-t-il ?
• Comment éviter les problèmes
• Vérification et modification de la surimpression dans PitStop Pro

Durée: 10 minutes

Les nouveautés de PitStop 2022:

• Prise en charge de PDF 2.0
• Améliorations concernant les fonds perdus

Durée: 5 minutes

This is the recording of a workshop given by Loïc Aigon, PitStop Product Manager, and Freddy Pieters, Solution Architect, on April 3rd, 2024.

Topics:

• PitStop 24 changes
• PitStop 24.03 release
• Some tricks
• Q/A

Duration: 1 hour

Highlights of PitStop 2022:

- Support for PDF 2.0 

- Bleed improvements

Duration: 5 mins in total

This is a short demo on how to activate a PitStop Pro subscription.

Duration: 1 minute

This is the recording of a webinar given by Andrew Bails-Collins on April 1st, 2021.

Duration: 1 hour

Learn about the great new features this upgrade brings:

• Color swatches 
• Tracing a shape to create a path 
  
• New bleed check
• Overlay PDF
• Check if visual content exists (based on computer vision technology)
• A number of new powerful Action Lists

Duration: 3 short movies (about 2 minutes each).

In this short eLearning course, we explain the use of the 'Check if visual content exists' Action, introduced in PitStop 2020.

Duration: 5 minutes

In this mini eLearning you'll learn how to create your own shortcuts in PitStop Pro.

Duration: 1 minute

This is an introduction to the new features of PitStop 2018 (released in April):

• Massive improvements to Pantone color handling to both PitStop Pro and PitStop Server.
  
• Ability to hard crop line art, allowing you to clean up files quickly and easily.
  
• Action List Visualizer, a new tool that allows you to troubleshoot your Action Lists.
  
• New vector editing tools that allow you to combine and divide groups of line art objects.
• New Action that generates barcodes directly in PitStop.

Duration: 2-5 minutes per movie

PitStop 2017 ships with 40 DeviceLink profiles for color conversion, and enhanced transparency and ink coverage capabilities.

Duration: 5 minutes

This is an introduction to the new features of PitStop 2019:

• Preflighting for digital print: converting pages that "look" black to real black.
• The PitStop Server Dashboard
• Show objects outside page box
• The new Object Browser
• Check barcodes
• Rasterize selection

Apart from the PDF Geomapper Technology (see other movie), PitStop 2017 also has improvements to Ink Coverage check, the possibility to add Round Cornered Rectangles (Dieline/Cutter Guide), an all-new layer chapter in the Preflight report, the possibility to re-order and delete pages, and new scale and resize pages and selections Actions.

Duration: 5 minutes

PitStop 2017 brings an all-new technology to PDF Preflight: the PDF Geomapper Technology.
By preflighting only the objects needed to render or print a PDF, false errors are eliminated.

Duration: 3 minutes

These movies highlight the new functionality available in PitStop 13 update 2:

• Overview of new features
• Support for ISO 19593-1 Processing Steps, the specification that outlines how layers and optional content groups should be defined to support the non-printing elements of a complex PDF file. 
• New Preflight Profiles for Packaging

Duration: 5-6 mins per movie

This movie gives a brief overview of the new features of PitStop 13 update 1.

Features include:

• Improved processing speed for PitStop Server
• Add copied graphics Action List
• Contour based selections
• Check, select and replace complex pages
• Improved Crop images Action List
• Improved Select pages Action List
• Improved Select spot color Action List
• ...

Duration: 8:50

The following movies introduce the new features of PitStop 13:

• Detect missing bleed and fix it with PitStop
• Preflight certain aspects
• Customize Preflight messages

Duration: +- 5 mins per movie

This movie highlights the new features in PitStop Server 13, such as:

• The option to edit and create Action Lists in PitStop Server
• The Add bleed Action List
• Customized messages
• Preflight restrictions
• Improvements to the CLI version

Duration: 8:48

This is an introduction to the new features in PitStop 12 update 3: Action List changes, support for Yosemite, Layer Actions, ...

Duration: 8:29

This is an introduction to the new features in PitStop 12 update 2 (User units/page scaling factor, customizable shortcuts,...)

Duration: 11:04

• New Image and Layer Action Lists and the Clean up black Action List
• Image editing
• Alignment tools
• Gradient editing
• Ink usage report

Duration: +- 4 minutes per movie

This is the recording of a workshop given by Loïc Aigon, PitStop Product Manager, on January 3rd, 2024.

Topics: 

• Customer cases: 
  • Adding and using output intents
  • Clipping varnish
• PitStop 2023 update 1 release:
  
  • Form XObjects, Transparency, New Actions
  • And many more new features!

Duration: 1 hour

In this short course you'll learn how to install PitStop Pro and how to activate a free trial.

Duration: 5 minutes

In this course you'll learn the basics of PitStop Pro.

Content:

• Activating a permanent license or subscription
• Exploring the user interface
• Setting the PitStop Pro preferences
• Try it yourself (interactive exercise)

Duration: 20 minutes

In this course you'll learn where to find and how to use presets (Global Changes, Action Lists and QuickRuns) in Pitstop Pro.

Content:

• A short introduction
• Using Global Changes
• Executing an Action List
• Creating an Action List
• Using QuickRuns 

Duration: 20 minutes

In this course you'll learn about PDF quality control ("Preflighting") using PitStop Pro.

Content:

• Introduction
• Preflight Profiles
• Running a Preflight check
• Automating Preflight

Duration: 15 minutes

This eLearning course explains the basics of PitStop Server.

Content:

• Introduction
• Installation and activation
• The user interface
• Setting up hot folders
• Checking processed files
• Preferences
• Quiz

Duration: 30 minutes

This course consists of the following parts:

• Introduction
• Setting up Workgroup Manager
• Setting up PitStop to use a license from Workgroup Manager
• Quiz

Duration: 15 minutes

This is a very short introduction on how to fix bleed issues with PitStop Pro.

Duration: 5 minutes

This is a course on Action Lists in PitStop Pro. It consists of 5 modules with a lot of exercises. You can quit whenever you want and resume later.

Each module starts with a short explanation followed by a number of exercises (going from very easy in the first module to quite advanced in the last module). You will be asked to download files with relevant material for the exercises. Note that you must have Acrobat and PitStop Pro installed and activated, so you can practice.

Content of the 5 modules:

• Module 1: Getting Started
• Module 2: Selections
• Module 3: Changes
• Module 4: Checks, informs and settings
• Module 5: Extra exercises

In this course you'll learn how to customize your PitStop Preflight Reports, e.g. change the look and feel and optionally the content. You can for example use your company logo and colors (instead of the Enfocus branding), change the footer of the document, remove optional information that you don't need (e.g.the OPI information chapter), etc.

Content of this course:

• Introduction
• Preflight Report templates 
• How to create your own Preflight Report template

Duration: 15 minutes

This course consists of the following parts:

• Overview of the categories in the PitStop Inspector
• An interactive exercise

Duration: 15 minutes

This eLearning module covers the following topics:

• Introduction 
  
• Viewing page box properties 
  
• Making changes using the PitStop Page Box Panel
  
• Applying a design layout to create page boxes
  
• Exercise
  

This is a course about using Smart Preflight variables in PitStop Pro:

• A short introduction to Smart Preflight
• How to set up Smart Preflight
• Where to find example files and how to use them
• Smart Preflight and Action Lists
• Interactive exercise

Duration: 15 minutes

This is a short introduction to overprint in PitStop Pro.

Topics:

• Why you should be aware of overprint
• Basic rules
• How to avoid issues
• Checking and changing overprint in PitStop

Duration: 10 minutes

This is a course about using Smart Preflight variables in PitStop SERVER:

• A short introduction to Smart Preflight
• How to set up Smart Preflight
• Where to find example files and how to use them
• Smart Preflight and Action Lists
• Quiz

This is the recording of a webinar given by Michele Collins on July 18th, 2017.

Content:

• Customizing the UI for your workflow.
• Creating, Importing and/or editing a custom toolset.
• Setting up PitStop Pro keyboard shortcuts.
• Using preset databases for Action List and Preflight Profiles.

This is a short introduction to the Workspaces functionality in PitStop Pro.

Duration: 5 minutes

This course consists of the following parts:

• Overview of the PitStop Edit toolset
• An interactive exercise

Duration: 15 minutes

This course is a short introduction to Certified PDF.
You'll learn:

• What a Certified PDF is, 
• How to create one and 
• How to check the Certified PDF status of a PDF.

Duration: 10 minutes

This is a short eLearning about PDF versions and standards.

Topics:

• Brief history of PDF
• PDF versions and ISO standards
• PDF flavors
• PDF/X and PDF/A
• GWG specifications

Duration: 10 minutes

This is a short introduction to the Action List Visualizer, which allows you to see what an Action List is doing when you create or edit it.

Duration: 5 minutes

This is a recording of a webinar given by Jeff Philips and Michael Reiher on May 20th, 2014.

Jeff Phillips is responsible for education, training and support of Enfocus products for North American customers.
Michael Reiher brings the North American voice to the Enfocus Product management team in order to deliver even more innovative and valuable solutions to Enfocus customers.

Duration: 1 hour

This is a short demo on how to activate a PitStop Server subscription.

Duration: 1 minute

This movie explains the transparency flattening settings in PitStop Server (introduced in PitStop Server 12).

Duration: 4:13

This movie has been designed to guide users through the proper use and management of the Enfocus subscription licensing.

Duration: 5 minutes

Introduction to the basic tools of PitStop Pro.

This short movie is intended for new users.

Duration: 5 minutes

This is the recording of a webinar, given by Loïc Aigon, PitStop Product Manager, on September 6th, 2023.

Topics:

• Understanding variables
• Checking books (covers/internal)
• Using the Design Layout Editor
• Useful Switch Apps for books

Duration: 1 hour

• Looking back at hero features from past versions
  
• Using Standard resources to ease your onboarding
  
• Fixing typical pain-points in Digital Cutting with PitStop
  

Duration: 1 hour

This is the recording of a webinar, given by Loïc Aigon, PitStop Product Manager, and Freddy Pieters, Solution Architect, on June 7th, 2023.

Topic:

• Color management in PitStop Pro
• FastLane
• Using the Switch FastLane app

This is the recording of a webinar, given by Loïc Aigon, PitStop Product Manager, on May 3rd 2023.

Topic: PitStop 2023

New Features

• Log as Info
• JSON Reports
• Select Texts with RegEx
• Log Texts properties
• Variable Sets improvements
• FastLane

Other topics

• Speed Improvements
• Default CMM
• Security
• Requirements
• Bug Fixes

This is the recording of a webinar given by Freddy Pieters, Solution Architect, on December 7th, 2022.

Topic: What's new in PitStop 2022 update 1

Apart from compatibility with MacOS 13 (Ventura), this release brings: 

• A new PDF flattening library
• Compliance with the GWG 2022 specifications
• Improved PDF Overlay feature

Duration: 1 hour

This is the recording of a webinar given by Freddy Pieters, Solution Architect, on November 2nd, 2022.

Topic: Color management

• Color management engine support
• Color spaces
• ICC tagging
• Output intents
• Blending color spaces
• Black point compensation
• Device links

Duration: 1 hour

This is the recording of a webinar given by John Dean, PitStop Product Manager, on October 5th, 2022.

Topic: Introduction for new users who just installed PitStop Pro

• Some settings:
• Overprint
• Copy/Paste
• Customize Quick Tools
• Standard Action Lists
  • Good place to start
• Standard Preflight Profiles
  • Built from industry standards
• Import/Export
  • Prepress First Aid Kit
• Make your own
  • Duplicate a standard
  • Start from scratch

Duration: 1 hour

This is the recording of a webinar given by John Dean, PitStop Product Manager, on September 7th, 2022.

Topics: Wide Format

• Finishing concerns (grommets, hems, pockets)
• Effective resolution
• Page scaling factor
• Paths (cut lines, close paths, trace paths)
• Hard proofs (virtual mockups)

Duration: 50 minutes

• Transparency applied to a form
• Soft masks from MS Word
• Logo vs background

This is the recording of a webinar given by John Dean, Product Manager, on July 6th, 2022.

Topics:

• PitStop 2022 Hotfix release
• Strange behavior when adding bleed

Duration: 1 hour

This is the recording of a webinar given by John Dean, Product Manager, on June 1st, 2022.

Topic: Automated Preflight

• What flows generally look like
• Where to get and put variables
• PitStop Server variables vs Switch metadata
• Get away from hot folders and use Switch Core

Duration: 1 hour

This is the recording of a webinar given by John Dean, Product Manager, on May 4th, 2022.

Topic: Smart Preflight

Duration: 1 hour

This is the recording of a webinar given by John Dean, Product Manager, on April 6th, 2022.

Topic: Using operators in Action Lists (AND, OR, NOT, ROLL)

Duration: 1 hour

This is the recording of a webinar given by John Dean, Product Manager, on March 2nd, 2022.

Topic: New features of PitStop 2022 (preview)

Duration: 45 mins

This is the recording of a webinar given by Freddy Pieters and Laurent De Wilde, Solution Architects, on February 2nd, 2022.

Topics:

• Layer handling:  
• Overlay PDF
• Create layers
• Split layers

• The PitStop Dashboard

Duration: 1 hour

This is the recording of a webinar given by John Dean, Product Manager, on January 5th, 2022.

Topics:

• Imposition
• Reordering pages
• Create a simple dieline
• Duplicate pages

Duration: 1 hour

This is the recording of a webinar given by John Dean, Product Manager, on December 1st, 2021.

Topics:

• New guy behind the wheel
• Greeking out text
• Adding visual trim guides to a softproof
• Splitting a page, but not in half

Duration: 35 minutes

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on November 3rd, 2021.

Topics:

• Workshop Review
• PitStop 2021 update 1
• Customer files
• Resources and links
• Top 10 Actions

Duration: 1 hour

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on October 6th, 2021.

Topics:

• Acrobat update issue
• Customer questions

Duration: 1 hour

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on September 1st, 2021.

Topics:

• Adding a spine to an imposed cover
• Using masks
• User units (page scaling) explained

Duration: 1 hour

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on August 4th, 2021.

Topics:

• Transparency flattening issue
• Calculate ink usage on a shape
• Convert spot colors, but not Pantones
• Map specific Pantone colors and convert to CMYK
• Check height of text
• Copy and paste position problem

Duration: 1 hour

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on July 7th, 2021.

Topic: Ink coverage (TAC/TIC) and ink usage

Duration: 1 hour

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on June 2nd, 2021.

Topics:

• Varnishes
• Cutter guides (contours)
  Closing and compound paths
• Inserting pages

Duration: 1 hour

This is the recording of a webinar given by Laurent De Wilde, Solutions Architect, on May 5th, 2021.

Topic: Combination of PitStop Server and Switch Core Engine, some automation basics and tips and tricks

Duration: 1 hour

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on April 7th, 2021.

Topic:
Customer questions:

• Closing a path - why does it not work?
• Color looks flat - Black to 4 Color Black?
• Amount of ink?
• How to make a white underprint?
• Impose Readers pairs with Cover spread

Duration: 1 hour

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on February 3rd, 2021.

Topics:

• Manual step and repeat
• Delete and add graphics
• Creating dielines and cutter guides by tracing
• PDF Review Module 02 (sneak peek)

Duration: 1 hour

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on January 6th, 2021.

Topics:

• PitStop 2020 update 1
• Customer case (cutter guides)

Duration: 35 min

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on December 2nd, 2020.

Topics:

• PitStop 2020 update 1
• PDF/X-6

All topics and video timeline

Duration: 1 hour

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on November 4th, 2020.

Topics:

• Adding a postage paid automatically
• Making a Preflight Profile
• Optimize PDF Action List
• Check for empty pages Action List
• Check for single page image Action List (Photoshop PDF)

All topics and video timeline

Duration: 1 hour

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on October 7th, 2020.

Topics:

• Intelligently splitting pages
• Removing empty forms
• Dense ink issues on a laser cutter
• User units

All topics and video timeline

Duration: 1 hour

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on September 2nd, 2020.

Topic:

• Overprint

All topics and video timeline

Duration: 1 hour

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on August 5th, 2020.

Topic:

• Color management

All topics and video timeline

Duration: 1 hour

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on July 1st, 2020.

Topics:

• Conditional Color Remapping
• Advanced Color Conversion

PitStop 2020 features

• Find and replace text (variables)
• Add copied graphic - file path and variables
• Normalize Pantone names
• Check for corrupt images
• Check for number of images on a page
• Check for zero-width fill
• Flip selection
• Check for PDF 2.0

All topics and video timeline

Duration: 1 hour

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on June 3rd, 2020.

Topics:

• Issue with Acrobat update on Windows 10
• Customer case - Roll fold to single panels to spread

All topics and video timeline

Duration: 1 hour

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on May 6th, 2020.

Topic: PitStop 2020

All topics and video timeline

Duration: 1 hour

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on April 1st, 2020.

Topic: Transparency

• History of transparency
• Blend modes
• Blend spaces
• Groups
• Flattening
• Benefits of live transparency
• Preflight of transparency

All topics and video timeline

Duration: 1 hour

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on March 4th, 2020.

Topics: 

• Customer questions 
  (how to automating duplicating pages 1 and 2 to make 4 pages
  best way to reduce file size of a PDF file - Acrobat audit usage)
• New features in PitStop 2020 

All topics and video timeline

Duration: 1 hour

This is the recording of a webinar given by Freddy Pieters, Solution Architect, on Feb 5th, 2020.

Topic: Overprint 

Files used during this workshop

All topics and video timeline

Duration: 30 minutes

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on December 4th, 2019.

Main topic: Action Lists (Part 1)

All topics and video timeline

Duration: 1 hour

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on October 2nd, 2019.

Main topics:

• Tiling patterns (continued)
• Can I split a page into number of tiles 3x3 total 9 tiles?
• From which menu can I set the orientation for all pages to landscape or portrait?
• How can I control the page reordering specially for left to right or right to left languages after splitting pages into half?

All topics and video timeline

Duration: 58 minutes

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on September 4th, 2019.

Main topics: 

• Tiling patterns
• Pantone colors (remapping, creating and other functionality)

All topics and video timeline

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on August 7th, 2019.

Main topics:

• Splitting pages/Splitting a 3pp Gatefold
• High Gloss Stock, 235% DeviceLink (indigo)
• Rotating and moving objects
• Length of Cutter/Dieline

All topics and video timeline

Duration: 1 hour

This is the recording of a webinar given by Freddy Pieters, Solution Architect, on July 3rd, 2019.

Topics:

• Introduction (00:00-03:30)
• Design Layouts (03:30-11:30)
• Workspaces (11:30-16:00)
• Shortcuts (16:00-22:00)
• Importing special colors (22:00-end)

All topics and video timeline

Duration: 34 minutes

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on May 8th, 2019.

Main topics:

• New ways to insert pages
• Splitting a gatefold job into single pages

All topics and video timeline

Duration: 1 hour

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on April 3rd, 2019.

Main topics:

• PitStop 2019 release: 
• PitStop Server Dashboard
• Improvements so Insert Pages
• Improvements to Number of Separations Check
• Adding Corners to Rectangles and Page Boxes
• Split Action List
• Watermarks and adding content in general

All topics and video timeline

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on March 6th, 2019.

Main topics:

• Show objects outside page box
  
• The Object Browser

All topics and video timeline

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on February 6th, 2019.

Main topics:

• OpenType SVG fonts update
  
• Selecting black-and-white images for special handling
• CSR Preflight Profile

All topics and video timeline

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on January 9th, 2019.

Main topics:

• OpenType SVG fonts in Adobe Illustrator/InDesign 2019
• InDesign 2019 PieceInfo

All topics and video timeline

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on December 5th, 2018.

Main topics:

• PitStop analytics
• Clean up black
• Converting to black and white (grayscale)
• Black and white (minimum clicks for digital)
• Bleed revisited
• Large format pockets
• Two-sided banners

Agenda and video timeline

Duration: 1 hour

This is the recording of a webinar given by Freddy Pieters, Product Support Manager, on November 7th, 2018.

Topics:

• Add copied graphics - Grommets
  
• Copy & paste
• User units - Page scaling factor
• Regular expressions

Agenda and video timeline

Duration: 43 minutes

This is the recording of a webinar given by Freddy Pieters, Product Support Manager, on October 3rd, 2018.

Topics:

• PDF Layers
  
• Split layers app
• Resize spine app
• PitStop Server v3 XML Reports

All topics and video timeline

Duration: 50 minutes

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on August 8th, 2018.

Main topics:

• Customer questions
  
• Action List Visualizer
  

Agenda and video timeline

Duration: 1 hour

This is the recording of a webinar given by Jonas Yde, Support Engineer, on June 7, 2018.

Main topic: Action Lists

All topics and video timeline

Duration: 1 hour

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on May 2nd, 2018.

Main topic: PitStop 2018 functionality

All topics and video timeline

Duration: 1 hour

This is the recording of a webinar given by Jonas Yde, Software Support Engineer, on April 4th, 2018.

All topics and video timeline

Action Lists used during this workshop

Duration: 1 hour

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on March 7th, 2018.

Main topic: New features of PitStop 2018 (preview), such as the User Dashboard, the Action List Visualizer, new Pantone conversion Actions etc.

Duration: 1 hour

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on February 7th, 2018.

Duration: 1 hour

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on January 3rd, 2018.

Duration: 1 hour

This is the recording of a webinar given by Jeff Philips, on November 1st, 2017.
Jeff Phillips is responsible for education, training and support of Enfocus products for North American customers.

Topic: Working with Fonts

All topics and video timeline

Duration: 1 hour

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on October 4th, 2017.

Main topics:

• Varnish issue
  
• Clicks, handling of RGB Black and Crop Marks
  
• Customizing Keyboard Shortcuts in PitStop Pro Preferences
  
• Alignment of multiple objects in PitStop Pro (Inspector)
  
• Move/Click/Drag resizing with handles
  
• Actions to enlarge and reduce page size
  
• Resizing a page box to a selection like a Cutter Guide/Dieline
  

All topics and video timeline

Duration: 1 hour

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on September 6th, 2017.

Action List used in this webinar

Duration: 1 hour

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on August 2nd, 2017.

Main topics: 

• Splitting printer pair spreads to single pages in the correct order
• Error handling in Action Lists
• DeviceLink Profiles
• Standard Action Lists (Fonts/Images)

All topics and video timeline

Duration: 1 hour

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on July 5th, 2017.

Main topic: Latest standards

All topics and video timeline

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on June 7th, 2017.

Main topics:  

• PitStop Development – Customer Engagement 
• Ghent Workgroup – Digital Large Format Preflight Profiles
• 3 Customer sample files and a number of Action Lists to discuss

All topics and video timeline

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on May 3rd, 2017

Main topic:  PDF Geomapper technology released with PitStop 2017

All topics and video timeline

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on April 4th, 2017.

Main topics:

• GWG 2017 PDF Survey
  
• Overview of standard Devicelink profiles in PitStop 13.2
• Customer files: issues with removing separations, drop shadows when converting to CMYK etc. 

All topics and video timeline

Duration: 1 hour

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on March 1st, 2017.

Main topics:  Color & DeviceLink Profiles

All topics and video timeline

Presentation and files 

This is the recording of a webinar given by Jeff Philips on February 1st, 2017.

Main topics:  

• Change of Activation Accounts to an Enfocus ID
• The Enfocus Support Portal
• Jeff reviews some recent support cases regarding Action Lists and how they were debugged

All topics and video timeline

Duration: 1 hour

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on January 4th, 2017.

Main topics:  

• Bleed revisited
  
• Standard Action Lists discussed
  
• Color Action Lists

All topics and video timeline

Duration: 1 hour

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on November 2nd 2016.

Main topic: Masterclass in the image toning/retouching capabilities within PitStop

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on September 7th, 2016.

Main topics: standard Action Lists and Page Boxes 

All topics and video timeline

Duration: 1 hour

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on August 3rd, 2016.

Main topics: 

• Support process - Response times - Support Portal
• How to check you are on the latest PitStop version 

All topics and video timeline

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on July 6th, 2016.

Main topic: Getting Started with PitStop Server

All topics and video timeline

Duration: 1 hour

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on June 1st, 2016.

Main topic: PitStop 13 update 2 - new features

All topics and video timeline

Duration: 1 hour

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on May 4th, 2016

Main topics: 

• Finding out if a certain text phrase or a certain color is in or not in a PDF
• Making masks in PitStop

All topics and video timeline

Action List for 2-color job

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on April 6th, 2016.

Main topic: Regular Expressions in PitStop

All topics and video timeline

Duration: 1 hour

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on March 2nd, 2016.

Main topics:

• Customer file analysis - text dropping off when output/pages dropping off when imposed and output
• Preflight Restrictions - practical demos on how Preflight Restrictions can be used

All topics and video timeline

Duration: 1 hour

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on February 3rd, 2016.

Main topic: Design Layouts

All topics and video timeline

Duration: 1 hour

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on January 16th, 2016.

Main topic: Spot Colors

All topics and video timeline

Duration: 1 hour

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on December 2nd, 2015.

Main topics:  

• Adding Document name to the job as text outside Bleed area.
  
• Removing headers and footers
  
• Adjusting the Page Boxes
• Using Smart Preflight to run different Action Lists depending on Document Size
  

All topics and video timeline

Duration: 1 hour

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on November 5th, 2015.

Main topic: Overprint

All topics and video timeline

Duration: 1 hour

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on September 2nd, 2015.

Main topic: PDF Standards

All topics and video timeline

Duration: 1 hour

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on August 5th, 2015.

Main topic: Add bleed functionality

All topics and video timeline

Duration: 1 hour

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on July 1st, 2015.

Main topic: Getting Started with PitStop Pro (Acrobat XI/DC).

All topics and videotimeline

Basic Preflight Profile and Acrobat DC PitStop Custom Tool Set

Duration: 1 hour

This is a recording of a webinar given by Jeffrey J. Phillips (Senior Product Specialist) on June 3rd, 2015.

Main topic: Preflight in PitStop Pro

All topics and video timeline

Duration: 1 hour

This is a recording of a webinar given by Jeffrey J. Phillips (Senior Product Specialist) on May 6th, 2015.

Main topic: Working with selections and page boxes

All topics and video timeline

Duration: 1.5 hour

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on April 1st, 2015.

Main topics: 

• Page Boxes/Page Sizes
• Smart Preflight

All topics and video timeline

Duration: 1 hour

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on March 4th, 2015.

Main topic: Color Management in PitStop

All topics and video timeline

Duration: 1 hour

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on February 4th, 2015.

Main topic: Action Lists in PitStop Pro (Andrew elaborates on topics discussed in the January workshop)

All topics and video timeline

Duration: 1 hour

This is a recording of a webinar given by Jeffrey J. Phillips (Senior Product Specialist) on January 7th, 2015.

Main topic: Action Lists in PitStop Pro

All topics and video timeline

Duration: 1 hour

This is a recording of a webinar given by Jeffrey J. Phillips (Senior Product Specialist) on December 3rd, 2014.

Main topics: 

• Bleed in PitStop 12
• Adjusting the branding of a Preflight Report
• Workspace configuration

All topics and video timeline

Duration: 1 hour

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on November 5th, 2014.

Main topics: 

• PitStop 12 update 3 features
• Flatten a PDF with transparency
• Ink coverage, ink usage

All topics and video timeline

Duration: 1 hour

Novedades en PitStop 2022:

• Soporte para PDF 2.0
  
• Mejoras para sangrado
  

Duración: 5 minutos

Esta es un breve vídeo para demostrar cómo se puede activar una suscripción a PitStop Pro.

Duración: 2 minutos

Este es un breve vídeo para demostrar cómo se puede activar una suscripción a PitStop Server.

Duración: 2 minutos

En este breve curso aprenderá como instalar PitStop Pro y como activar una prueba gratuita.

Duración: 5 minutos

En este curso aprenderá los conceptos básicos de PitStop Pro.

Contenido:

• Activar una licencia permanente o por suscripción
  
• Explorar la interfaz de usuario
  
• Definir las preferencias de PitStop Pro

En este curso aprenderá donde encontrar y como usar Presets (Cambios Globales, Listas de Acciones y QuickRuns) en PitStop Pro.

Contenido:

• Una breve introducción
  
• Usar Cambios Globales
  
• Ejecutar una Lista de Acciones
  
• Crear una Lista de Acciones
  
• Utilizar QuickRuns 
  

Duración: 20 minutos

En este curso aprenderá sobre el control de calidad PDF (la aplicación de "Preflight") usando PitStop Pro.

Contenido:

• Introducción
  
• Perfiles Preflight
  
• Ejecutar una comprobación con Preflight
  
• Automatizar Preflight
  

Duración: 15 minutos

Este curso eLearning explica los conceptos básicos de PitStop Server.

Contenido:

• Introducción
  
• Instalación y activación
  
• La interfaz de usuario
  
• Configuración de HotFolders
  
• Comprobar archivos procesados
  
• Preferencias
  
• Examen
  

Duración: 30 minutos

Este curso consiste en las partes siguientes:

• Introducción
  
• Configurar Workgroup Manager
  
• Configurar PitStop Pro para utilizar una licencia desde Workgroup Manager
  
• Examen
  

Duración: 15 minutos

En este mini curso aprenderá a añadir sangrado con PitStop Pro.

Duración: 5 minutos

Este módulo eLearning consiste en 2 partes:

• Parte 1 - El conjunto de herramientas Editar de PitStop
• Parte 2 - Ejercicio Interactivo

Duración: 15 minutos

Este módulo eLearning consiste en 5 partes:

Parte 1 - Introducción

Parte 2 - Ver las Propiedades de las Casillas de Página 

Parte 3 - Realizar cambios usando el Panel Casilla de Página PitStop

Parte 4 - Aplicar un Trazado de Diseño para Crear Casillas de Página

Parte 5 - Ejercicio

Duración: 20 minutos

En esta corta demostración aprenderá como crear tus propios accesos directos en PitStop Pro.

Duración: 1 minuto

Este módulo eLearning consiste en 2 partes:

• Parte 1 - Las Categorías de Inspector

• Parte 2 - Ejercicio Interactivo Usando el Inspector

Duración: 15 minutos

En este curso aprenderás todo sobre el PDF certificado.

Duración: 10 minutos

En este breve curso aprenderá como personalizar Informes Preflight.

• Parte 1 - Acerca de Informes Preflight
• Parte 2 - Plantillas de Informe
• Parte 3 - Como crear su propia plantilla de Informe

Duración: 15 minutos

Este curso es una breve introducción a la funcionalidad Áreas de Trabajo en PitStop Pro.

Duración: 5 minutos

En este curso aprenderá los conceptos básicos de sobreimpresión.

Contenido:

• Problemas con sobreimpresión
• Como funciona estod
• Cómo evitar problemas
• Comprobar y cambiar la preimpresión en PitStop Pro

Este módulo eLearning consiste en las partes siguientes:

• Parte 1 - Presentación
• Parte 2 - Versiones de PDF
• Parte 3 - Como determinar la versión de un PDF
• Parte 4 - Variantes del Estándar PDF
• Parte 5 - PDF/X 
• Parte 6 - PDF/A 

Duración: 10 minutos

Nuove funzioni di PitStop 2022:

• Supporto di PDF 2.0
  
• Miglioramenti sull’abbondanza
  

Durata: 5 minuti

Questa è una demo molto breve che spiega come attivare un abbonamento a PitStop Pro.

Duration: 2 minutes

In questo breve corso imparerete come installare PitStop Pro e come attivare una versione di prova gratuita.

Durata: 5 minuti

In questo corso imparerete le basi di PitStop Pro.

Contenuto:

• Attivazione di una licenza permanente o abbonamento
  
• Esplorazione dell'interfaccia utente
  
• Impostare le preferenze di PitStop Pro

Durata: 20 minuti

In questo corso imparerete dove trovare e come utilizzare i preset (Modifiche Globali, QuickRun ed Elenchi Azioni) in Pitstop Pro.

Contenuto:

• Una breve introduzione
  
• Usare le Modifiche Globali
  
• Progettare un Elenco Azioni
  
• Creare un Elenco Azioni
  
• Usare le QuickRun 
  

Durata: 20 minuti

In questo corso imparerete cosa c'è da sapere sul controllo di qualità dei PDF ("Preflighting") usando PitStop Pro.

Contenuto:

• Introduzione
  
• Profili di preflight
  
• Esecuzione di un controllo di preflight
  
• Automatizzazione del preflight
  

Durata: 15 minuti

Questo corso prevede le seguenti parti:

• Introduzione
  
• Impostazione di Workgroup Manager
  
• Configurazione di PitStop per l'uso di una licenza mobile da Workgroup Manager
  
• Quiz
  

Durata: 15 minuti

Questo corso in e-learning spiega le basi di PitStop Server.

Contenuto:

• Introduzione
  
• Installazione e attivazione
  
• Interfaccia utente intuitiva
  
• Impostazione hot folder
  
• Controllo dei file elaborati
  
• Preferenze
  
• Quiz
  

Questo modulo di e-learning è costituito da 2 parti:

• Parte 1 - Le categorie dell’Ispettore
• Parte 2 - Esercizio interattivo di utilizzo dell’Ispettore

Durata: 15 minuti

Questo modulo di e-learning è costituito da 2 parti:

• Parte 1 - Gli strumenti PitStop Modifica
• Parte 2 - Esercizio interattivo

Durata: 15 minuti

Questo modulo di e-learning è costituito da 5 parti:

• Parte 1 - Cosa sono le Dimensioni Pagina
• Parte 2 - Visualizzare le proprietà della pagina
• Parte 3 - Effettuare modifiche usando il pannello PitStop Dimensione Pagina
• Parte 4 - Applicare un Layout Disegno per creare Dimensioni Pagina
• Parte 5 - Esercizio

Durata: 20 minuti

In questo breve corso imparerete come creare le proprie scorciatoie in PitStop Pro.

Durata: 1 minuto

In questo breve corso imparerete come personalizzare i Report di Preflight.

Questo modulo di e-learning è costituito da 3 parti:

• Parte 1 - Informazioni sui Report di preflight 
• Parte 2 - Template di report 
• Parte 3 - Come creare i propri template di report

Durata: 15 minuti

Questo corso è una breve introduzione a Certified PDF.

Durata: 10 minuti

Questo corso è una breve introduzione alla funzionalità dei Workspace in PitStop Pro.

Durata: 10 minuti

In questo corso imparerete come gestire la sovrastampa in PitStop

Contenuto:

• Problemi con la sovrastampa
• Come funziona
• Come evitare problemi
• Verificare e modificare la sovrastampa in PitStop Pro

Durata: 10 minuti

Questo corso prevede le seguenti parti:

• Parte 1 - Introduzione
• Parte 2 - Versioni PDF
• Parte 3 - Come determinare la versione di un PDF
• Parte 4 - Tipologie di Standard PDF
• Parte 5 - PDF/X 
• Parte 6 - PDF/A 

Durata: 10 minuti

Dieses eLearning-Modul besteht aus 2 Teilen:

• Teil 1  Der Werkzeugsatz “PitStop-Bearbeitung”
• Teil 2  Interaktive Übung

Dauer: 15 Minuten

In diesem kurzen Kurs erfahren Sie, wie Sie PitStop Pro installieren und eine kostenlose Testversion aktivieren können.

Dauer: 5 Minuten

In diesem Kurs lernen Sie die Grundlagen von PitStop Pro kennen.

Inhalt:

• Aktivieren einer Dauerlizenz oder eines Abonnements
• Erkunden der Benutzeroberfläche
• Einstellen der PitStop Pro-Einstellungen
• Selbst ausprobieren (interaktive Übung)

Dauer: 20 Minuten

In diesem Kurs lernen Sie, wo Sie in Pitstop Pro die Voreinstellungen (Globale Änderungen, Aktionslisten und QuickRuns) finden und wie Sie sie verwenden können.

Dieses eLearning-Modul besteht aus 5 Teilen:

• Teil 1: Einführung
• Teil 2: Globale Änderungen
• Teil 3: Aktionslisten: Verwenden einer Aktionsliste
• Teil 4: Aktionslisten: Erstellen Ihrer eigenen Aktionsliste
• Teil 5: QuickRuns

Dauer: 20 Minuten

In diesem Kurs lernen Sie die PDF-Qualitätskontrolle ("Preflight") mit PitStop Pro kennen.

Inhalt:

• Über Preflight
  
• Preflight-Profile
  
• Ausführen einer Preflight-Prüfung
  
• Preflight-Berichte
  
• Automatisieren des Preflights
  

Dauer: 15 Minuten

Dieser Kurs besteht aus den folgenden Teilen:

• Überblick über die Kategorien im PitStop Inspector
• Eine interaktive Übung

Dauer: 15 Minuten

Dies ist ein kurzer E-Learning-Kurs über PDF-Versionen und Standards.

Themen:

• Kurze Geschichte von PDF
• PDF-Versionen und ISO-Standards
• PDF-Aromen
• PDF/X und PDF/A
• GWG-Spezifikationen

Dauer: 10 Minuten

Dies ist eine kurze Einführung in das Handhaben von Überdrucken in PitStop Pro.

Inhalt dieses Kurses:

• Warum Sie das Überdrucken kennen sollten
• Funktionsweise
• Vermeiden von Problemen können
• Überprüfen und Ändern von Überdrucken in PitStop Pro

Dauer: 10 Minuten

Dieses eLearning-Modul besteht aus 4 Teilen:

• Teil 1   - Einführung
• Teil 2  - Starten eines Certified PDF-Workflows
• Teil 3  - Überprüfen einer Certified PDF-Dateien
• Teil 4  - Quiz

Dauer: 10 Minuten

Dieses eLearning-Modul besteht aus 5 Teilen:

• Teil 1 -  Über Seitenrahmen
• Teil 2  - Anzeigen der Eigenschaften der Seitenrahmen
• Teil 3  - Vornehmen von Änderungen mithilfe des Fensters “PitStop-Seitenrahmen”
• Teil 4  - Anwenden eines Design-Layouts auf “Seitenrahmen erstellen”
• Teil 5  - Übung

Dauer: 20 Minuten

Dies ist eine kurze Einführung in die Funktionalität der Arbeitsbereiche in PitStop Pro.

Dauer: 5 Minuten

In diesem Kurs lernen Sie, wie Sie Ihre PitStop-Preflight-Berichte anpassen können, z. B. das Erscheinungsbild und optional den Inhalt ändern. Sie können z. B. Ihr Firmenlogo und Ihre Farben verwenden (anstelle des Enfocus-Brandings), die Fußzeile des Dokuments ändern, optionale Informationen entfernen, die Sie nicht benötigen (z. B. das Kapitel mit den OPI-Informationen), usw.

Inhalt dieses Kurses:

• Einführung
• Berichtsvorlagen 
• Erstellen Ihrer eigenen Berichtsvorlage

Dauer: 15 Minuten

Dieser Kurs besteht aus den folgenden Teilen:

• Einführung
• Einrichten von Workgroup Manager
• Einrichten von PitStop zur Verwendung einer Lizenz von Workgroup Manager
• Quiz

Dauer: 15 Minuten

Dieser eLearning-Kurs erklärt die Grundlagen von PitStop Server.

Inhalt:

• Teil 1: Einführung
• Teil 2: Installieren und Aktivieren von PitStop Server
• Teil 3: Die PitStop Server-Benutzeroberfläche
• Teil 4: Einrichten von Hot Foldern
• Teil 5: Überprüfen der verarbeiteten Dateien
• Teil 6: PitStop Server-Voreinstellungen
• Teil 7: Quiz

Dauer: 30 Minuten

In diesem Mini-E-Learning lernen Sie, wie Sie Ihre eigenen Kurzbefehle in PitStop Pro erstellen können.

Dauer: 1 Minute

Dies ist eine kurze Demonstration, wie ein PitStop Server-Abonnement aktiviert wird.

Dauer: 1 Minute

Dies ist eine kurze Demo zur Aktivierung eines PitStop Pro-Abonnements.

Dauer: 1 Minute

Dies ist eine sehr kurze Einführung in die Behebung von Anschnittproblemen mit PitStop Pro.

Dauer: 5 Minuten