Formation

Découvrez les nouvelles fonctionnalités de Switch 2022 Spring :

• Prise en charge de JSON
• Applications par défaut
• Autre points forts de cette version

Durée: 8 minutes au total

Les nouveautés de PitStop 2022:

• Prise en charge de PDF 2.0
• Améliorations concernant les fonds perdus

Durée: 5 minutes

Ce module de formation en ligne comprend quatre parties :

• Partie 1 - Activation de PitStop Pro
  
• Partie 2 - Découverte de l’interface utilisateur de PitStop Pro
  
• Partie 3 - Définition des préférences dans PitStop Pro
  
• Partie 4 - À vous de jouer
  

Durée : 20 minutes

Ce module de formation en ligne comprend cinq parties :

• Partie 1 -  À propos des contrôles en amont
  
• Partie 2 - Profils de contrôle en amont
  
• Partie 3 - Exécution d’un contrôle en amont
  
• Partie 4 - Rapports de contrôle en amont
  
• Partie 5 - Contrôles en amont automatiques
  

Durée : 20 minutes

Dans cette formation, vous allez apprendre comment activer und licence d'abonnement PitStop Server.

Duration: 1 minute

Ce module de formation en ligne comprend quatre parties :

• Partie 1 - Introduction
  
• Partie 2  - Configuration de Workgroup Manager
  
• Partie 3  - Configuration de PitStop Pro pour le fonctionnement avec Workgroup Manager
  
• Partie 4  - Questionnaire
  

Durée : 15 minutes

Ce module de formation en ligne comprend deux parties :

• Partie 1 - Le jeu d’outils Modification PitStop
• Partie 2 - Exercice interactif

Durée: 15 minutes

Ce cours sur l'utilisation des zones de page comprend cinq parties:

• Introduction
• Visualisation des propriétés des zones de page
• Modifications à l'aide du panneau Zone de page PitStop
• Application d'une disposition de conception à la creation des zones de page
• Exercice

Durée: 20 minutes

Ce cours est une très courte introduction sur la façon de régler les problèmes de fond perdu avec PitStop Pro.

Durée: 5 minutes

Voici une brève introduction à la fonctionnalité Espaces de travail dans Pitstop Pro.

Durée: 5 minutes

Voici une petite vidéo sur la configuration de BoardingPass.

Durée: 1 minute

Cette démo vous apprendra à ouvrir les fichiers stockés localement, les fichiers joints aux e-mails et les fichiers téléchargés à partir de WeTransfer.

Durée: 2 minutes

Cette démo vous apprendra comment procéder...

• lorsque le fichier n'a pas satisfait à la validation.
• lorsque le fichier est prêt pour le prépresse.

Durée: 2 minutes

This is the recording of a workshop given by Davy Verstaen, Switch Product Manager, and Freddy Pieters, Solution Architect, on December 14th, 2022.

Topic: What's new in Switch 2022 Fall

Duration: 1 hour

This is the recording of a webinar given by Freddy Pieters, Solution Architect, on December 7th, 2022.

Topic: What's new in PitStop 2022 update 1

Apart from compatibility with MacOS 13 (Ventura), this release brings: 

• A new PDF flattening library
• Compliance with the GWG 2022 specifications
• Improved PDF Overlay feature

Duration: 1 hour

Highlights of PitStop 2022:

- Support for PDF 2.0 

- Bleed improvements

Duration: 5 mins in total

This is a short introduction to the Refresh job info flow element.

Duration: 2 minutes

This is a short demo on how to activate a PitStop Pro subscription.

Duration: 1 minute

In this webinar, Freddy Pieters and Laurent De Wilde, Solution Architects @ Enfocus, explain the new scripting features of Switch 2021 Spring.

Duration: 1 hour

Content:

• Introduction
  
• Setting up the PDF Review Module
• Configuring flows in Switch
• Reviewing files using the PDF Review Module.

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, and Laurent De Wilde, Solution Architect at Enfocus.

Contents:

• Using apps from the Enfocus Appstore: some basic apps + PitStop Server apps
• Integrating third-party applications
• Smart preflight with Switch
• Advanced metadata: XML, JDF, webhook
• Connecting with rips, ERP, MIS, databases
• Switch Client and the Switch Web Portal
• The PDF Review module

Duration: 1 hour

In this short demonstration, you'll learn how to integrate an external hot folder application in your Switch flow, using the Generic application flow element.

Duration: 5 minutes

This is the recording of a webinar given by Freddy Pieters and Laurent De Wilde, Solution Architects @ Enfocus. In this webinar, Freddy and Laurent take you through the ins and outs of the new scripting engine.

Duration: 2 hours

In this webinar, Toon Van Rossum, product manager at Enfocus, explains the concepts you need to master before moving to writing scripts for Switch.

You can also download a summary of what was discussed in this webinar.

Duration: 1 hour

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager at Enfocus, and Deborah Corn on May 28th, 2020.

In this webinar, they give the first demo of our new tool, BoardingPass, which will enable customer facing staff at printing companies to quickly onboard PDF jobs, and give customer feedback in a minute, no prepress required.

Duration: 50 minutes

In this mini-course we explain the use of Split multi-job, one of the Switch flow elements, which can be found in the Basics category.

Other tools that are covered are Archive, Unarchive and Recycle bin.

Duration: 5 minutes

In this short eLearning course, we explain the use of the 'Check if visual content exists' Action, introduced in PitStop 2020.

Duration: 5 minutes

In this eLearning course we'll explain the use of two flow elements that can be used to rename jobs.

Duration: 5 minutes

In this course we explain flow elements that enable you to split up and reassemble folders:

• Ungroup job
• Job dismantler
• Assemble job

Duration: 10 minutes

This movie has been designed to guide you through the online activation and deactivation process for Enfocus software (only valid for perpetual licenses).

Duration: 6:54

This is an introduction to the new features of PitStop 2018 (released in April):

• Massive improvements to Pantone color handling to both PitStop Pro and PitStop Server.
  
• Ability to hard crop line art, allowing you to clean up files quickly and easily.
  
• Action List Visualizer, a new tool that allows you to troubleshoot your Action Lists.
  
• New vector editing tools that allow you to combine and divide groups of line art objects.
• New Action that generates barcodes directly in PitStop.

Duration: 2-5 minutes per movie

This is an introduction to the new features of PitStop 2019:

• Preflighting for digital print: converting pages that "look" black to real black.
• The PitStop Server Dashboard
• Show objects outside page box
• The new Object Browser
• Check barcodes
• Rasterize selection

PitStop 2017 brings an all-new technology to PDF Preflight: the PDF Geomapper Technology.
By preflighting only the objects needed to render or print a PDF, false errors are eliminated.

Duration: 3 minutes

This movie gives a brief overview of the new features of PitStop 13 update 1.

Features include:

• Improved processing speed for PitStop Server
• Add copied graphics Action List
• Contour based selections
• Check, select and replace complex pages
• Improved Crop images Action List
• Improved Select pages Action List
• Improved Select spot color Action List
• ...

Duration: 8:50

This movie highlights the new features in PitStop Server 13, such as:

• The option to edit and create Action Lists in PitStop Server
• The Add bleed Action List
• Customized messages
• Preflight restrictions
• Improvements to the CLI version

Duration: 8:48

This is an introduction to the new features in PitStop 12 update 2 (User units/page scaling factor, customizable shortcuts,...)

Duration: 11:04

Discover the new features in Switch 2022 Spring:

• JSON Support
• Default apps
• Other highlights

Duration: +- 10 minutes in total

This is an introduction to the new features of Switch 2019 Spring:

• Switch Server messages: new design
• Improved Submit points: 
• Submit metadata without a file 
• Create direct link URLs to a Submit point
• Switch Dashboard enhancements
• The Remote process element
• Inject job improvements

Duration: 5 minutes

Duration: 10 minutes

This movie highlights the new features in Switch 13:

• UI improvements
• Web messages

Duration: 4:40

This movie gives a short overview of the new features in Switch 2021 Spring (released May 27, 2021).

Duration: 4 minutes

This is an introduction to the new features in Switch 12:

• Switch Remote Designer
• Users and groups
• Submit points and Checkpoints
• Split PDF/Merge PDF
• ...

Este vídeo ofrece una visión general de las nuevas características de Switch 2022 Spring:

• Compatibilidad con JSON
• Apps predeterminados
• Novedades destacades

Duración: 8 minutos en total

Scoprite le nuove funzionalità di Switch 2022 Fall.

Durata: 2 minuti

Entdecken Sie die neuen Funktionen von Switch 2022 Fall.

Dauer: 2 Minuten

Connect 13 update 2 transforms the job submission process by giving Connect ALL customers the ability to deploy dynamic HTML job tickets in their remote Connectors.

These new Connectors enhance the experience of the printer’s customers, while providing a way to capture important job-related information that can ultimately flow directly into the printer’s workflow.

Duration: 5 minutes

This product movie highlights the new features of Connect 13.

Duration: 4 minutes

In this course you'll learn the basics of PitStop Pro.

Content:

• Activating a permanent license or subscription
• Exploring the user interface
• Setting the PitStop Pro preferences
• Try it yourself (interactive exercise)

Duration: 20 minutes

In this course you'll learn about PDF quality control ("Preflighting") using PitStop Pro.

Content:

• Introduction
• Preflight Profiles
• Running a Preflight check
• Automating Preflight

Duration: 15 minutes

This course consists of the following parts:

• Introduction
• Setting up Workgroup Manager
• Setting up PitStop to use a license from Workgroup Manager
• Quiz

Duration: 15 minutes

This is a course on Action Lists in PitStop Pro. It consists of 5 modules with a lot of exercises. You can quit whenever you want and resume later.

Each module starts with a short explanation followed by a number of exercises (going from very easy in the first module to quite advanced in the last module). You will be asked to download files with relevant material for the exercises. Note that you must have Acrobat and PitStop Pro installed and activated, so you can practice.

Content of the 5 modules:

• Module 1: Getting Started
• Module 2: Selections
• Module 3: Changes
• Module 4: Checks, informs and settings
• Module 5: Extra exercises

This course consists of the following parts:

• Overview of the categories in the PitStop Inspector
• An interactive exercise

Duration: 15 minutes

This is a course about using Smart Preflight variables in PitStop Pro:

• A short introduction to Smart Preflight
• How to set up Smart Preflight
• Where to find example files and how to use them
• Smart Preflight and Action Lists
• Interactive exercise

Duration: 15 minutes

This is a course about using Smart Preflight variables in PitStop SERVER:

• A short introduction to Smart Preflight
• How to set up Smart Preflight
• Where to find example files and how to use them
• Smart Preflight and Action Lists
• Quiz

This is a short introduction to the Workspaces functionality in PitStop Pro.

Duration: 5 minutes

This course is a short introduction to Certified PDF.
You'll learn:

• What a Certified PDF is, 
• How to create one and 
• How to check the Certified PDF status of a PDF.

Duration: 10 minutes

This is a short introduction to the Action List Visualizer, which allows you to see what an Action List is doing when you create or edit it.

Duration: 5 minutes

This is a short demo on how to activate a PitStop Server subscription.

Duration: 1 minute

This movie has been designed to guide users through the proper use and management of the Enfocus subscription licensing.

Duration: 5 minutes

This is the recording of a webinar given by Freddy Pieters, Solution Architect, on November 2nd, 2022.

Topic: Color management

• Color management engine support
• Color spaces
• ICC tagging
• Output intents
• Blending color spaces
• Black point compensation
• Device links

Duration: 1 hour

This is the recording of a webinar given by John Dean, PitStop Product Manager, on September 7th, 2022.

Topics: Wide Format

• Finishing concerns (grommets, hems, pockets)
• Effective resolution
• Page scaling factor
• Paths (cut lines, close paths, trace paths)
• Hard proofs (virtual mockups)

Duration: 50 minutes

This is the recording of a webinar given by John Dean, Product Manager, on July 6th, 2022.

Topics:

• PitStop 2022 Hotfix release
• Strange behavior when adding bleed

Duration: 1 hour

This is the recording of a webinar given by John Dean, Product Manager, on May 4th, 2022.

Topic: Smart Preflight

Duration: 1 hour

This is the recording of a webinar given by John Dean, Product Manager, on March 2nd, 2022.

Topic: New features of PitStop 2022 (preview)

Duration: 45 mins

This is the recording of a webinar given by John Dean, Product Manager, on January 5th, 2022.

Topics:

• Imposition
• Reordering pages
• Create a simple dieline
• Duplicate pages

Duration: 1 hour

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on November 3rd, 2021.

Topics:

• Workshop Review
• PitStop 2021 update 1
• Customer files
• Resources and links
• Top 10 Actions

Duration: 1 hour

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on September 1st, 2021.

Topics:

• Adding a spine to an imposed cover
• Using masks
• User units (page scaling) explained

Duration: 1 hour

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on July 7th, 2021.

Topic: Ink coverage (TAC/TIC) and ink usage

Duration: 1 hour

This is the recording of a webinar given by Laurent De Wilde, Solutions Architect, on May 5th, 2021.

Topic: Combination of PitStop Server and Switch Core Engine, some automation basics and tips and tricks

Duration: 1 hour

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on February 3rd, 2021.

Topics:

• Manual step and repeat
• Delete and add graphics
• Creating dielines and cutter guides by tracing
• PDF Review Module 02 (sneak peek)

Duration: 1 hour

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on December 2nd, 2020.

Topics:

• PitStop 2020 update 1
• PDF/X-6

All topics and video timeline

Duration: 1 hour

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on October 7th, 2020.

Topics:

• Intelligently splitting pages
• Removing empty forms
• Dense ink issues on a laser cutter
• User units

All topics and video timeline

Duration: 1 hour

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on August 5th, 2020.

Topic:

• Color management

All topics and video timeline

Duration: 1 hour

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on June 3rd, 2020.

Topics:

• Issue with Acrobat update on Windows 10
• Customer case - Roll fold to single panels to spread

All topics and video timeline

Duration: 1 hour

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on April 1st, 2020.

Topic: Transparency

• History of transparency
• Blend modes
• Blend spaces
• Groups
• Flattening
• Benefits of live transparency
• Preflight of transparency

All topics and video timeline

Duration: 1 hour

This is the recording of a webinar given by Freddy Pieters, Solution Architect, on Feb 5th, 2020.

Topic: Overprint 

Files used during this workshop

All topics and video timeline

Duration: 30 minutes

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on December 4th, 2019.

Main topic: Action Lists (Part 1)

All topics and video timeline

Duration: 1 hour

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on September 4th, 2019.

Main topics: 

• Tiling patterns
• Pantone colors (remapping, creating and other functionality)

All topics and video timeline

This is the recording of a webinar given by Freddy Pieters, Solution Architect, on July 3rd, 2019.

Topics:

• Introduction (00:00-03:30)
• Design Layouts (03:30-11:30)
• Workspaces (11:30-16:00)
• Shortcuts (16:00-22:00)
• Importing special colors (22:00-end)

All topics and video timeline

Duration: 34 minutes

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on April 3rd, 2019.

Main topics:

• PitStop 2019 release: 
• PitStop Server Dashboard
• Improvements so Insert Pages
• Improvements to Number of Separations Check
• Adding Corners to Rectangles and Page Boxes
• Split Action List
• Watermarks and adding content in general

All topics and video timeline

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on February 6th, 2019.

Main topics:

• OpenType SVG fonts update
  
• Selecting black-and-white images for special handling
• CSR Preflight Profile

All topics and video timeline

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on December 5th, 2018.

Main topics:

• PitStop analytics
• Clean up black
• Converting to black and white (grayscale)
• Black and white (minimum clicks for digital)
• Bleed revisited
• Large format pockets
• Two-sided banners

Agenda and video timeline

Duration: 1 hour

This is the recording of a webinar given by Freddy Pieters, Product Support Manager, on October 3rd, 2018.

Topics:

• PDF Layers
  
• Split layers app
• Resize spine app
• PitStop Server v3 XML Reports

All topics and video timeline

Duration: 50 minutes

This is the recording of a webinar given by Jonas Yde, Support Engineer, on June 7, 2018.

Main topic: Action Lists

All topics and video timeline

Duration: 1 hour

This is the recording of a webinar given by Jonas Yde, Software Support Engineer, on April 4th, 2018.

All topics and video timeline

Action Lists used during this workshop

Duration: 1 hour

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on February 7th, 2018.

Duration: 1 hour

This is the recording of a webinar given by Jeff Philips, on November 1st, 2017.
Jeff Phillips is responsible for education, training and support of Enfocus products for North American customers.

Topic: Working with Fonts

All topics and video timeline

Duration: 1 hour

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on September 6th, 2017.

Action List used in this webinar

Duration: 1 hour

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on July 5th, 2017.

Main topic: Latest standards

All topics and video timeline

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on May 3rd, 2017

Main topic:  PDF Geomapper technology released with PitStop 2017

All topics and video timeline

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on March 1st, 2017.

Main topics:  Color & DeviceLink Profiles

All topics and video timeline

Presentation and files 

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on January 4th, 2017.

Main topics:  

• Bleed revisited
  
• Standard Action Lists discussed
  
• Color Action Lists

All topics and video timeline

Duration: 1 hour

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on November 2nd 2016.

Main topic: Masterclass in the image toning/retouching capabilities within PitStop

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on September 7th, 2016.

Main topics: standard Action Lists and Page Boxes 

All topics and video timeline

Duration: 1 hour

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on July 6th, 2016.

Main topic: Getting Started with PitStop Server

All topics and video timeline

Duration: 1 hour

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on May 4th, 2016

Main topics: 

• Finding out if a certain text phrase or a certain color is in or not in a PDF
• Making masks in PitStop

All topics and video timeline

Action List for 2-color job

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on March 2nd, 2016.

Main topics:

• Customer file analysis - text dropping off when output/pages dropping off when imposed and output
• Preflight Restrictions - practical demos on how Preflight Restrictions can be used

All topics and video timeline

Duration: 1 hour

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on January 16th, 2016.

Main topic: Spot Colors

All topics and video timeline

Duration: 1 hour

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on November 5th, 2015.

Main topic: Overprint

All topics and video timeline

Duration: 1 hour

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on September 2nd, 2015.

Main topic: PDF Standards

All topics and video timeline

Duration: 1 hour

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on July 1st, 2015.

Main topic: Getting Started with PitStop Pro (Acrobat XI/DC).

All topics and videotimeline

Basic Preflight Profile and Acrobat DC PitStop Custom Tool Set

Duration: 1 hour

This is a recording of a webinar given by Jeffrey J. Phillips (Senior Product Specialist) on May 6th, 2015.

Main topic: Working with selections and page boxes

All topics and video timeline

Duration: 1.5 hour

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on March 4th, 2015.

Main topic: Color Management in PitStop

All topics and video timeline

Duration: 1 hour

This is a recording of a webinar given by Jeffrey J. Phillips (Senior Product Specialist) on January 7th, 2015.

Main topic: Action Lists in PitStop Pro

All topics and video timeline

Duration: 1 hour

This is the recording of a webinar given by Andrew Bailes-Collins, Senior Product Manager, on November 5th, 2014.

Main topics: 

• PitStop 12 update 3 features
• Flatten a PDF with transparency
• Ink coverage, ink usage

All topics and video timeline

Duration: 1 hour

Novedades en PitStop 2022:

• Soporte para PDF 2.0
  
• Mejoras para sangrado
  

Duración: 5 minutos

Este es un breve vídeo para demostrar cómo se puede activar una suscripción a PitStop Server.

Duración: 2 minutos

En este curso aprenderá los conceptos básicos de PitStop Pro.

Contenido:

• Activar una licencia permanente o por suscripción
  
• Explorar la interfaz de usuario
  
• Definir las preferencias de PitStop Pro

En este curso aprenderá sobre el control de calidad PDF (la aplicación de "Preflight") usando PitStop Pro.

Contenido:

• Introducción
  
• Perfiles Preflight
  
• Ejecutar una comprobación con Preflight
  
• Automatizar Preflight
  

Duración: 15 minutos

Este curso consiste en las partes siguientes:

• Introducción
  
• Configurar Workgroup Manager
  
• Configurar PitStop Pro para utilizar una licencia desde Workgroup Manager
  
• Examen
  

Duración: 15 minutos

Este módulo eLearning consiste en 2 partes:

• Parte 1 - El conjunto de herramientas Editar de PitStop
• Parte 2 - Ejercicio Interactivo

Duración: 15 minutos

En esta corta demostración aprenderá como crear tus propios accesos directos en PitStop Pro.

Duración: 1 minuto

En este curso aprenderás todo sobre el PDF certificado.

Duración: 10 minutos

Este curso es una breve introducción a la funcionalidad Áreas de Trabajo en PitStop Pro.

Duración: 5 minutos

Este módulo eLearning consiste en las partes siguientes:

• Parte 1 - Presentación
• Parte 2 - Versiones de PDF
• Parte 3 - Como determinar la versión de un PDF
• Parte 4 - Variantes del Estándar PDF
• Parte 5 - PDF/X 
• Parte 6 - PDF/A 

Duración: 10 minutos

Questa è una demo molto breve che spiega come attivare un abbonamento a PitStop Pro.

Duration: 2 minutes

In questo corso imparerete le basi di PitStop Pro.

Contenuto:

• Attivazione di una licenza permanente o abbonamento
  
• Esplorazione dell'interfaccia utente
  
• Impostare le preferenze di PitStop Pro

Durata: 20 minuti

In questo corso imparerete cosa c'è da sapere sul controllo di qualità dei PDF ("Preflighting") usando PitStop Pro.

Contenuto:

• Introduzione
  
• Profili di preflight
  
• Esecuzione di un controllo di preflight
  
• Automatizzazione del preflight
  

Durata: 15 minuti

Questo corso in e-learning spiega le basi di PitStop Server.

Contenuto:

• Introduzione
  
• Installazione e attivazione
  
• Interfaccia utente intuitiva
  
• Impostazione hot folder
  
• Controllo dei file elaborati
  
• Preferenze
  
• Quiz
  

Questo modulo di e-learning è costituito da 2 parti:

• Parte 1 - Le categorie dell’Ispettore
• Parte 2 - Esercizio interattivo di utilizzo dell’Ispettore

Durata: 15 minuti

Questo modulo di e-learning è costituito da 5 parti:

• Parte 1 - Cosa sono le Dimensioni Pagina
• Parte 2 - Visualizzare le proprietà della pagina
• Parte 3 - Effettuare modifiche usando il pannello PitStop Dimensione Pagina
• Parte 4 - Applicare un Layout Disegno per creare Dimensioni Pagina
• Parte 5 - Esercizio

Durata: 20 minuti

In questo breve corso imparerete come personalizzare i Report di Preflight.

Questo modulo di e-learning è costituito da 3 parti:

• Parte 1 - Informazioni sui Report di preflight 
• Parte 2 - Template di report 
• Parte 3 - Come creare i propri template di report

Durata: 15 minuti

Questo corso è una breve introduzione alla funzionalità dei Workspace in PitStop Pro.

Durata: 10 minuti

Questo corso prevede le seguenti parti:

• Parte 1 - Introduzione
• Parte 2 - Versioni PDF
• Parte 3 - Come determinare la versione di un PDF
• Parte 4 - Tipologie di Standard PDF
• Parte 5 - PDF/X 
• Parte 6 - PDF/A 

Durata: 10 minuti

The second Switch Getting Started module consists of the following parts:

• The Switch user interface
• Flows and flow elements
• Creating a flow

This fourth Switch module consists of the following parts:

• Embedded metadata and file information
  
• Variables
• Try it yourself (an interactive exercise)

In this course you'll learn ...

• How to get quick access to your test files
• How to clean up your flow in between test runs
• How to avoid that jobs get lost
• How to retry problem jobs
• ...

Duration: 15 minutes

This is the recording of an online training given by Freddy Pieters and Laurent De Wilde, Solution Architects.

Duration: 2h

In this mini-course, you'll learn about the Switch Web Portal features for administrators,
such as:

• Viewing flows and flow properties using the Flow viewer
• Adding annotations to flows
• Starting and stopping flows remotely
• Checking logins and system info
• Placing your company's logo on the Web Portal login page

Duration: 5 minutes

In this course we explain how you can easily move jobs within a flow, from one flow to another, or from one Switch Server to another. 

The tools explained in this course are:

• Pack job, Unpack job and Monitor confirmation (flow elements)
• Switch2Switch (free app)
• Portals (free app)

Duration: 10 minutes 

This is an introduction to two flow elements in the Communications category: FTP send and FTP receive.
FTP send enables uploading jobs to an FTP site, FTP receive enables downloading jobs from an FTP site to submit them to a Switch flow.

Duration: 10 minutes

This is a short introduction to the Switch Reporting Module.

Duration: 3:13

Note that there's also an eLearning course about the Reporting Module.

This is a short introduction to the Metadata tools in Switch:

• JSON pickup
• XML pickup
• JDF pickup
• XMP pickup
• Opaque pickup
  
• Export metadata
• XMP inject

"XSLT transform" is also explained in this course.

Duration: 15 minutes

This is short course about the Switch 'Sort files in job' flow element.

Duration: 5 minutes

This is a short introduction to Enfocus TestDrive, a tool that enables you to quickly compare the output of your Switch flows to a set of earlier created reference files. That way you can verify that:

• Your existing flows still work correctly after you have installed a new version of Switch, an app, a third-party application,…
• Your changes or extensions to a flow do not break any existing functionality.

Duration: 15 minutes

In this webinar, Toon Van Rossum, Switch Product Manager, discusses the Remote process flow element.
This flow element was introduced in Switch 2019 Spring and allows users to route Switch jobs out of the flow, process them remotely using a remote service, and then bring them back into the flow after processing.

In this webinar ,Toon explains what you need to know to be able to develop a remote service that can be used with this new flow element.

Duration: 20 minutes

This is a short explanation of the Switch Core Engine, the Switch module that provides the basic functionality for receiving, sorting, routing and tracking of files. 

This movie was recorded with Switch version 12, but the content is still relevant if you're working with a newer version of Switch.

Duration: 9 minutes

This movie provides a short introduction to the Switch Configurator Module.

Note that the movies were recorded with Switch version 12, but the content is still relevant if you're working with a newer version of Switch.

Duration: 7 minutes

This is a recording of a webinar given by Ted Vahey on May 22nd, 2014.

Ted Vahey is the founder and Workflow Automation Consultant for All Systems Integration, an Enfocus Certified Partner that specializes in enhancing and automating production workflow solutions. Learn to leverage the information in your existing database driven applications like MIS and CRM systems.

Duration: 50 minutes

This is a recording of a webinar given by William Buckingham on April 23rd, 2015.

William Buckingham is the President of XChange US in North America—leading supplier of PDF workflow and automation tools, publishing applications and other productivity utilities.

Learn how to harness the power of job tickets, database queries and barcodes to automate data-entry and decision making processes in your production workflow. You’ll see how the Metadata, Database and Scripting Modules enable Switch to provide your files with the ‘intelligence’ needed to reduce manual manipulation and touch points. File intelligence also enables workflows to leverage the Smart Preflight capabilities at the heart of PitStop Server. Smart Preflight allows all Profiles and Action Lists to be 'personalized' on a per file basis to ensure the most effective PDF verification and correction in the industry.

Duration: 45 minutes

This is a recording of a webinar given by Ted Vahey and John Callahan on July 16th, 2015.

Ted Vahey is the founder and Workflow Automation Consultant for All Systems Integration, an Enfocus Certified Partner that specializes in enhancing and automating production workflow solutions.

John Callahan is a partner and Workflow Automation Consultant for All Systems Integration, an Enfocus Certified Partner that specializes in enhancing and automating production workflow solutions.

Do you have a simple variable data project? Would you like to create a custom job ticket, filled with data from your MIS system or any data source for that matter?  Maybe you need to include a slipsheet in a variable printing job? How about adding customization to a shell? Ted and John show you how to do this with just InDesign and Switch. 

Duration: 42 minutes

This is a recording of a webinar given by Andrea Mahoney on July 9th 2015.

Andrea Mahoney is an Information Systems graduate with a database programming background.

In this webinar, you'll see how Enfocus Connect ALL, and Enfocus Switch can be used to extend your Prinergy RBA workflow all the way back to your customer. Connect ALL will help your customers by automating PDF creation and give them an easy to use doorway direct to your workflow environment. You'll learn how job tickets created by Connect can be used in Switch to prepare and route jobs directly to Prinergy where jobs are automatically created and processed.

Duration: 49 minutes

Being the heart of their production, Enfocus Switch helps Tangent to develop 50% more business...

Duration: 3:20

This movie introduces the Enfocus Appstore.

Duration: 5:00

This is the recording of a workshop given by Davy Verstaen, Switch Product Manager, on October 12th, 2022.

Topic: How to revert back to a previous version or state of your job after it has gone through some processing steps.

For example, you have downsized a PDF file to be able to forward it to your customer for approval. Or you have manipulated the file to add or extract some information but you will need to revert to a previous version before you forward it to production. 

This is the recording of a workshop given by Freddy Pieters, Solution Architect, on August 10th, 2022.

Topics:

• Folder Apps:
  • Filepool Cleanup
  • Job Sorter and Spacer
  • Filetypes Counter
• Generic application
• Execute command

Duration: 1 hour

This is the recording of a workshop given by Davy Verstaen, product manager, on June 8th, 2022.

Topic: Switch 2022 Spring

Duration: 1 hour

This is the recording of a workshop given by Freddy Pieters, Solution Architect, on April 13th, 2022.

Topic: Hold jobs

• Holding jobs:
• Hold job
• Assemble job
• Hold job groups
• Checkpoint
• HoldJobPlus
• Spacing jobs
• Hold job
• Job Sorter and Spacer (Folder Apps by Enfocus)
• Load balancing jobs
• Hold job

Duration: 1 hour

This is the recording of a workshop given by Davy Verstaen, product manager, on February 9th, 2022.

Topic: How to automate the preflighting process?

• Submit point and Checkpoint metadata
• PitStop Server Smart preflight
• Google Sheets Connect app (by ezFlow)
• PDF Review module
• Job boards

Duration: 2 hours

This is the recording of a workshop given by Davy Verstaen, product manager, on December 8th, 2021.

Topics:

• What's new in Switch 2021 Fall
• Webhook scripting with Node.js

Duration: 1 hour

This is the recording of a workshop given by Laurent De Wilde, Solution Architect, on October 13th,  2021.

Topic: Switch & Variable Data Printing

Duration: 1 hour

This is the recording of a workshop given by Laurent De Wilde, Solution Architect, on August 11th,  2021.

Topics:

• PDF Review Module Reporter app (by Enfocus)
• PDF Review Module Switch flows: tips and tricks
• Web page with PDF review jobs 
• Integration in the Switch Web Portal

Duration: 1 hour

This is the recording of a workshop given by Toon Van Rossum, Product Manager, on May 13th, 2020.

Topic: Switch 2020 Spring: pre-release

• Flow viewer in the Web Portal (for admins) 
• Scripting: support for Node.js

Duration: 1 hour

Topics: 

• Switch and Trello... a match made in heaven (by Laurent De Wilde, Solution Architect)
• Switch scripting: JavaScript for everyone
• Switch performance 

Duration: 1 hour

This is the recording of a workshop given by Laurent De Wilde, Solution Architect, on December 10th, 2019.

Topic: The power of apps

Duration: 1 hour

This is the recording of a workshop given by Toon Van Rossum, Product Manager, on September 10th, 2019.

Topic: Using job boards and dashboards to monitor your Switch flows

Duration: 50 minutes

This is the recording of a workshop given by Toon Van Rossum, Product Manager, on August 1st, 2019.
It is the second part of a series of monthly workshops, in which Toon shares a lot of tips and tricks and best practices while building a smart solution for managing and archiving media files.

Topics:

• Submit point metadata
• Introduction to TestDrive

This is the recording of a webinar given by Toon Van Rossum, Product Manager, on June 18th, 2019.

Topics:

• Announcement of the new series of monthly workshops for maintenance customers
  (Here's the link to register)
• Some pre-release information
• Overview of new features in Switch 2019 Spring

Duration: 30 minutes

This is the recording of a webinar given by Toon Van Rossum, Switch Product Manager, on November 22nd, 2017.

Main topic: feature overview Switch 2017 update 2

• Feature overview
• SwitchClient workaround for metadata fields of which the order was changed
• Switch Messages opening in Designer

Duration: 1 hour

This is the recording of a webinar given by Toon Van Rossum, Product Manager, on April 12th 2017.

Topics
Switch 2017 update 1:

• SwitchClient licensing (back to "floating" licenses)
• REST API

Duration: 51 minutes

This is the recording of an online Basic Switch Training given by Freddy Pieters and Laurent De Wilde in October 2019.

URL: https://learning.enfocus.com/course/view.php?id=260

not on our website, accessible if you have the link (auto enrollment)

This is an online training for Partners given by Laurent De Wilde and Freddy Pieters in October 2019.

URL: https://learning.enfocus.com/course/view.php?id=262

Duration: 2h

Das zweite Modul der Reihe "Erste Schritte" besteht aus den folgenden Teilen:

• Teil 1:  Die Switch-Benutzeroberfläche
• Teil 2: Flows und Flow-Elemente
• Teil 3:  Erstellen eines Flows

Dauer: 15 Minuten

Dieses vierte Switch eLearning Modul besteht aus den folgenden Teilen:

• Teil 1: Eingebettete Metadaten und Dateiinformationen
  
• Teil 2: Variablen
  
• Teil 3: Versuchen Sie es selbst

Dauer: 20 Minuten

In diesem Kurs lernen Sie ...

• wie Sie schnell auf Ihre Testdateien zugreifen können
• wie Sie Ihren Flow zwischen den Testläufen bereinigen
• wie Sie vermeiden, dass Jobs verloren gehen
• wie Sie Problem-Jobs wiederholen
• ...

Dauer: 15 Minuten

• Parte 1 - L’interfaccia utente di Switch
• Parte 2 - Flussi ed elementi di flusso
• Parte 3 - Creazione di un flusso

Durata: 15 minuti

• Metadati incorporati e informazioni sui file
• Variabili
• Prova tu stesso (un esercizio interattivo)

Durata: 20 minuti

In questo corso imparerete ...

• Come ottenere un accesso rapido ai file di test
• Come ripulire il flusso tra un'esecuzione di test e l'altra
• Come evitare che i lavori vadano persi
• Come riprovare i lavori che presentano problemi
• ...

Durata: 15 minutos

This short eLearning course explains how to activate a Connect YOU trial.

Duration: 2 minutes

In this eLearning module you’ll learn how Connect YOU can check (and fix) your artwork for common issues like image resolution, trim page size, spot inks, transparency etc. 

Thanks to the predefined ‘Check Job Essentials’ project, this is now a piece of cake ...

Duration: 15 minutes

This is a recording of a webinar given by Michael Reiher, Product Manager, on May 20th, 2014.

Have you ever wished you could just automatically take control of your customers computer make all the settings for them when it comes to creating PDFs to be sent to you for production?

Duration: 1 hour

This movie demonstrates how Connect ALL can be used in a large format printing environment.

Duration: 3:58

This movie demonstrates the use of Smart Preflight in Connect XML Job Tickets.

Duration: 4:34

This is an introduction to Enfocus Connect ALL.

Duration: 8:16

This is an introduction to Enfocus Connect YOU.

Duration: 7:58

With Connect you can configure Connectors that allow you to print PDFs directly from the Creative Suite application into the Connector. This video explains how this works.

Duration: 3:36

This is the recording of a webinar given by Michael Reiher, Senior Product Manager, on April 21st, 2017.

The workshop consists of 2 parts:

• In part 1, Michael explains how to set up an update server for remote Connector users.
• In part 2, he explains how to move an update server to a new FTP or HTTP server.

Duration: 15 minutes (part 1) + 10 minutes (part 2)

This is the recording of a webinar given by Michael Reiher, Senior Product Manager, on March 15th, 2017.

In the second part of the March workshop, Michael Reiher overviews how Job Ticket variables can be used for file naming FTP delivery points, and within emails generated by Connect.

Duration: 5 minutes

This is the recording of a webinar given by Michael Reiher, Senior Product Manager, on January 18th, 2017.

Michael talks about Job Tickets:

• Types of Job Tickets
• Functions that can use metadata variable
• Modifying the default CSS
• Working with an external HTML

Duration: 54 minutes

This is part of a workshop given by Andrew Bailes-Collins, Senior Product Manager. In this webinar he talks about DeviceLink Profiles in PitStop 2017 and their uses, for example how to use DeviceLinks to convert between color standards (Output Intents).

Duration: 13:24 mins

This is part of a workshop given by Andrew Bailes-Collins, Senior Product Manager.

In this webinar, you'll learn how to split pages in half and change the page order as required.

Duration: 9:42 mins

This is part of a webinar given by Andrew Bailes-Collins, Senior Product Manager, in which he explains how you can crop images using an Action List.

Duration: 1:50

This is part of a webinar given by Andrew Bailes-Collins, Senior Product Manager.

In this webinar he explains how you can manually resize objects with handles via click & drag, by using numbers and grouping, or via Action Lists.

Duration: 6:13

This is part of a webinar given by Andrew Bailes-Collins, Senior Product Manager.

In this webinar he explains how to set up your own keyboard shortcuts.

Duration: 2:08